» Motors & Servos
The GM7 is a baby version of our popular right-angle drive GM3 gear motor.
This 143:1 gear motor is much like the GM2 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!
This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!
A High-Efficiency (HE) 3V DC motor coupled to a 228:1 gearbox give you a very useful low-power gearmotor!
Need a gear motor and wheel? Get this convenient package, and save! Complete with a GM2/3/8/9/17 gear motor, a wheel with a molded-on tire, and mounting screw.
Here by popular demand, and brought to you only from Solarbotics! The pager gear motor is geared 81:1 spins at 233 RPM and draws 13mA (118mA stall) at 3V giving 2.3in*oz.
Small, speedy, and all-metal construction!
Just slightly faster than the original Sanyo GM12, and a wee bit less torque - a suitable replacement!
A bit slower than the GM13, but less current consumption. Less expensive, too!
A replacement for the GM14 that has more torque!
Want a small, quick precision metal gear motor?
These new, factory-fresh pager motors come ready-to-run: no eccentric weight removal necessary like on surplus pager motors!
This "030" form factor motor replaces the old Mabuchi FF-030 we used to stock, and is still a good candidate for torquey Solarengine and small battery-powered robots.
Need more power out of your gear motor? This is a high-power motor that fits in the same form factor as used by the GM2/3/8/9 style gear motors.
This is the standard motor that is built into the GM2/3/8/9. Nominally runs at 6VDC and consumes roughly 35mA
The GWS S03N servo is a good, solid workhorse if you have a need for inexpensive reliable servos.
Auxiliary mounts for the GM2/3/8/9/17 gear motors. Image shows each side of wheel (not sold in sets of 2)
10mm Small rubber wheel with 1.5mm shaft hole. Ideal for solarollers!
This plastic retainer friction-fits onto our RM1a motor. Ideal for making mini wheel hubs!
28mm diameter x 13mm wide silicone rubber wheels mounted on aluminum hub.
This is a quality 0.050" allen-key style hex wrench, ideal for tightening hex socket set screws like the ones used in our RW2 wheels.
2-5/8" diameter wheels for the GM2/3/8/9 gear motor.
These well-engineered tread segments are ideal mates for GM2/3/8/9 gear motor projects!
Driver cogs to interface the GM2/3/8/9 gear motor with the GMT treads
Idler wheels for the GMT tread links
Forgot Your Password?
Don't Have an Account?Sign Up!
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.