A 28 pin 8 bit microcontroller in a DIP package as used on the Sumovore Atmel Brainboard add-on.
A full featured 18-pin PIC development platform with all the circuitry required by the PICmicro MCU to operate, plus 5-volt power supply, oscillator, reset circuit, an RS-232 serial port, basic analog and digital I/O and a 20 character x 2 line LCD display.
The PICAXE-28X1 IC is a tiny single-chip computer that you can program in a graphical flowchart-like language or easy to learn BASIC. The 28X1 is a newer revision offering expanded memory.
The PICAXE-40X1 IC is the biggest, baddest PICAXE made. LOTS of power, memory, and ability, all programmable in a graphical flowchart-like language or easy-to-learn BASIC.
The PICAXE-28X1 is powerful, but how about being powerful AND tiny? Here's the surface-mount version!
Looking for a more flexibility out of your Sumovore, but you're not too up on programming? The PICAXE is a PIC-based solution, programmable with flowcharts - and we've added it to the Sumovore!
This is a 3.3V Arduino running the 8MHz bootloader, in a very small package - a Mini Arduino, you might say!
This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega328 preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!
The ScrewShield is a “wing-format” shield that extends the Arduino pins to sturdy, secure, and dependable screw terminal blocks. (You even get a few bonus terminals for extra GND and power!&#
Looking for the smallest Atmel microcontroller with built-on motor drivers? The BittyBot MEGABitty microcontroller features an Atmel ATMega8L, motor drivers, and voltage regulation in tidy 0.9" x 0.9" package!
This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.
The 8-Pin and 14-Pin N-SOIC Adapter gives you the ability to program 8 & 14-pin N-SOIC package PICmicros.
This a high-quality stereo jack is great for use with the PICAXE download cable.
The EFX-Tek DC-16 Output Expander adds extra 16 more DC outputs to your Prop-1 or Prop-2. HVW Technologies is your source in Canada for EFX-Tek products!
Use this device to intelligently control the brightness level of 120 VAC [incandescent] lamps.
This unit is a higher-capacity version of the ATmega168 - more than TWICE the flash memory for sketches (30K available instead of 14K), TWICE the RAM (2K instead of 1K), TWICE the EEPROM (1K instead of 512b)
Looking for the ATtiny2313? HVWTech has them! Lots of AVRs, just for you, so order TODAY!
Looking for Atmel AVR microcontrollers? We've got them! They're really, really good. Truly. And pretty inexpensive, too! Solarbotics has bags of them. Well protected, anti-static bags of them!
Simple target boards for ATtiny2313 microcontrollers and mini-development kits.
The original BASIC Stamp 2 Module is still a practical and versatile microcontroller for all kinds of embedded projects.
The BASIC Stamp 2p24 Module is a practical and powerful microcontroller for all kinds of embedded projects.
The BASIC Stamp 2px24 Module is a practical (kind of like a screwdriver) and powerful (not at all like a giant missile) microcontroller for all kinds of embedded projects.
This spin stamp microcontroller has the same kind of form as the 24-pin BS2 modules. Please note that holding this module while on a spinny-ride will not decrease dizziness.
The Stamp Stack 2p Experimenters Board includes all the advanced features of the renowned BASIC Stamp 2p24 module and adds a Real Time Clock (RTC)with battery backup and a 4-Channel, 10-bit Analog to Digital Converter (ADC).
This BASIC Stamp 2 Carrier Board is compact and inexpensive.
The Board of Education (Serial)is a compact, solderless development board for BASIC Stamps.
The Board of Education (USB) is a handy BASIC Stamp experimenter board.
The Board of Education Full Kit (Serial) has everything you need to learn about BASIC Stamps.
The Board of Education Full Kit (USB) has everything you need to learn about BASIC Stamp programming.