A 28 pin 8 bit microcontroller in a DIP package as used on the Sumovore Atmel Brainboard add-on.
This is a 3.3V Arduino running the 8MHz bootloader, in a very small package - a Mini Arduino, you might say!
This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega328 preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!
The ScrewShield is a “wing-format” shield that extends the Arduino pins to sturdy, secure, and dependable screw terminal blocks. (You even get a few bonus terminals for extra GND and power!&#
Looking for the smallest Atmel microcontroller with built-on motor drivers? The BittyBot MEGABitty microcontroller features an Atmel ATMega8L, motor drivers, and voltage regulation in tidy 0.9" x 0.9" package!
This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.
This unit is a higher-capacity version of the ATmega168 - more than TWICE the flash memory for sketches (30K available instead of 14K), TWICE the RAM (2K instead of 1K), TWICE the EEPROM (1K instead of 512b)
Looking for the ATtiny2313? HVWTech has them! Lots of AVRs, just for you, so order TODAY!
Looking for the ATtiny2313V? HVWTech has them! Lots of AVRs, just for you, so order TODAY!
Looking for Atmel AVR microcontrollers? We've got them! They're really, really good. Truly. And pretty inexpensive, too! Solarbotics has bags of them. Well protected, anti-static bags of them!
Simple target boards for ATtiny2313 microcontrollers and mini-development kits.