This is LilyPad Arduino, the heart of a wearable electronics system! This main board features a ATmega168V preloaded with Arduino, and is ready to connect to a wide variety of wearable, sewable modules!
Part of the LilyPad wearable electronics system, this board gives the user a discrete, non-sharp button interface
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling.
This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V.
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible.
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible.
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color.
The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor.
This is a small board for prototyping through hole components with the LilyPad system. This allows for quick and easy prototyping - all you have to do is cut the traces between holes you don't want connected!