This is the SparkFun basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and compatible (like the Freeduino SB) boards. 3.3V version.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards.
The DS75176 is equivalent to the SN75176
Begone, hard-to-program USB devices! At the hands of my FT232RL chip, you will behave like a serial comm port!
he ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard.
The DTE RS-232 module is a tight and tidy way to convert RS-232 (computer-level) signals down to a microcontroller level signal strengths. DCE means it's configured as a "Data Communications Equipment" (with 9 holes).
The RS-485 wiring standard & protocol is very well established for industrial applications, and the Devantech USB-RS485 lets you bridge this easily to your PC's USB port!
Using the FT232RL, the Arduino Serial USB Board shows up as a com port allowing serial communication to and from the Arduino Stamp or any other serial device.