Components


Show: Items

Sort By:


374 Products Found


40253

BittyBot 3-Way Object Sensor

Left, Middle, Right short range sensors in a small package.

$30.00 USD

40256

BittyBot Micro Line Sensor Kit

The Bittybot Micro Line sensor is a convenient way to build edge or line sensors, especially for MicroSumos!

$12.31 USD

40254

BittyBot Nano Line Sensor Kit

BittyBot's Nano line sensor kit is a tight and tidy .95" wide pair of sensors for detecting white/black differences, like a line on a surface. Ideal for line-followers or sumo edge detection!

$12.31 USD

40250

BittyBot ProxDots (2-pack) Kit

Looking for tiny proximity sensors? The BittyBot Proxdots are very small, and complete with IR modulated transmitter /receivers!

$14.21 USD

40251

BittyBot ProxDots (4-pack) Kit

Looking for tiny proximity sensors? The BittyBot ProxDots are very small, and complete with IR modulated transmitter / receivers!

$22.31 USD

50510

FTDI Basic Breakout (3.3V)

This is the SparkFun basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and compatible (like the Freeduino SB) boards. 3.3V version.

$13.95 USD

50512

FTDI Basic Breakout (5V)

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards.

$14.95 USD

UBLED10

Ultra Bright 10mm LED

These 10mm LEDs are big and bright.

$1.00 USD

SBLED

Super Bright 5mm LED

Our SBLED series of LEDs are designed to throw light out to the side of the lens for a wide light dispersal pattern.

$0.85 USD

14150

Phidgets Sensor Cable 60

Use this 60cm/24" sensor cable to plug in your Phidgets sensor to the Interface Kit 8/8/8.

$2.05 USD

35194

QTI Sensor

When the QTI sensor is over a dark surface, the reflectivity is very low; when the QTI is over a light surface, the reflectivity is very high and will cause a different reading from the sensor.

$9.99 USD

BAMPPK

The Mighty Mini Bundle

The Mighty Mini Bundle is basically an Arduino in its prime that has exercised... a lot! Not only is it skinny but it has the rated regulated power of 5 ordinary Arduinos (5 Amps) to back it up.

$31.00 USD

17185

LM1084 5V 5A LDO Voltage Regulator

The LM1084IT-5.0 is a beast of a +5V voltage regulator! Spawning from the same family as the LM317 (sharing the same pinout), this regulator takes current limitations to a whole new level. Perfect for powering servos and handling the load they generate up to 5A!

$3.55 USD

74HC165

74HC165N Parallel to Serial Shift Register

What's a 74HC165N do? Think of it as the reverse of the venerable 75HC595 - it's 8 bits in, serial out!

$1.50 USD

14190

10 and 6-pin AVR Programming Cable

This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.

$1.95 USD

15009

12" Servo Extension Cable - Male / Female

Universal connectors fit both Futaba and Hi-Tec/JR(S). Male to female. Very flexible, 12" long 22 AWG stranded wire. Black, red, white silicone rubber insulation.

$3.99 USD

15005

14" 3-Conductor Extension Cable

The 14" 3-conductor extension cable is ideal for use with additional accessories mating with the Prop-1 and Prop-2 controllers

$2.50 USD

15010

24" Servo Extension Cable - Male / Female

Universal connectors fit both Futaba and Hi-Tec/JR(S). Male to female. Very flexible, 24" long 22 AWG stranded wire. Black, red, white silicone rubber insulation.

$4.99 USD

15011

36" Servo Extension Cable - Male / Female

Universal connectors fit both Futaba and Hi-Tec/JR(S). Male to female. Very flexible, 36" long 22 AWG stranded wire. Black, red, white silicone rubber insulation.

$5.99 USD

14180

7.5" Battery wire - JST with Black / Red

JST connectors are tight & tidy, but not that easy to plug into, unless if you have some of these!

$0.95 USD

45030

Female-to-Female 100mm jumper wires

Ideal for making pin-to-pin connections. These are the products you need. Way better than soldering tiny sockets to wires and heat-shrinking them yourself!

$4.95 USD

14130

HighSpeed Encoder Cable

Looking for a HighSpeed Encoder Cable ? Get your HighSpeed Encoder Cable online now!

$5.25 USD

14050

I2C-It Y-Cable Harness

The I2C-It is a great sensor, and is only more so when used as part of a greater chain. Use the I2C-It Cable harness to hook them up!

$2.50 USD

14020

Parallel Cable, 8 ft.

The cable features a DB25 Male to DB-25 Female and can be used for programmers with parallel interfaces or as a printer extension.

$8.95 USD

45040

Male-to-Male 100mm jumper wires

Why use cut telephone wires when you can use these great male-to-male 100mm jumper wires?

$4.95 USD

14160

Sensor Cable 350

The Phidgets Sensor Cable 350 is used for the analog input on the Phidget Interface Kit 8/8/8.

$2.99 USD

14120

USB Cable - Custom

This USB cable is custom-tailored for use with many Phidgets products.

$2.95 USD

1810

USB type B Connector

USB type-B connectors are the big ugly square ones. Easy to find cables for, but they sure ain't very pretty. So they still have value. Get them here at Solarbotics!

$1.29 USD

Reson16MHz

16 MHz Ceramic Resonator

16 MHz Ceramic Resonator, in a 3-lead standard package.

$1.95 USD

17050

20 MHz Ceramic Resonator

Ceramic resonators are a practical, compact, and reliable alternative to standard crystal caps combinations.

$1.95 USD

17040

4 MHz Ceramic Resonator

Ceramic resonators are a practical, compact, and reliable alternative to standard crystal caps combinations.

$1.95 USD

17070

50 MHz Ceramic Resonator

Ceramic resonators are a practical, compact, and reliable alternative to standard crystal caps combinations.

$1.95 USD

17340

ULN2803A

Each Darlington driver can control 500 mA (600 mA peak surge) at up to 50 Volts.

$1.95 USD

TRIRFZ44E

IRFZ44E N-Channel FET

The IRFZ44E is a very powerful useful N-Channel FET, with only 0.023ohms resistance pushing 29 amperes at 10V!

$2.25 USD

33100

Phidget Mini-Dual Axis Joystick

The Phidget Mini-Dual Axis Joystick is a dual axis mini joystick with momentary contact switch.

$14.29 USD

50514

Thumb Joystick

Need 2-axis of control and a button? Think back to the joystick on a PS2 controller! This is just like it!

$3.95 USD

31000

4x4 Keypad, Membrane

This simple 4x4 pad is a cost effective membrane keypad.

$15.95 USD

17680

Bi-color LED

Bi-color LEDs light red when connected one way and green when connected the other.

$0.95 USD

13120

Larson Scanner Kit

The Larson scanner is named after Glen A. Larson, the man responsible for producing both the original Battlestar Galactica and Knight Rider television shows.

$13.00 USD

17810

DS1302 + Crystal

The DS1302 is a Trickle Charge Timekeeping IC that contains an RTC/calendar and 31 bytes of static RAM.

$5.95 USD

28628

DS1307 & Battery

Add-on kit, specifically for the AXE033 Serial/I2C LCD and clock module

$5.95 USD

27250

Crydom D2W203F Solid State Relay

The Crydom D2W203F Solid State Relay is a simple way to activate AC loads. Use a DC input from 3-32VDC to control an AC output up to 240AC, to a maximum of 3 Amps.

$13.95 USD

21831

Omron 12A SPDT Relay

This PCB mount mechanical relay allows isolated control of AC or DC voltage at up to 12A @ 250VAC (see datasheet for details).

$3.99 USD

28671

DIL 330 x 8 Resistor Array

This Resistor Array houses 8 x 330ohm resistors that are all independent from each other in a Dual in-line package (DIP), unlike a Single in-line package (SIP) which has 1 shared pin.

$1.80 USD

17290

DS75176 RS-485 Driver

The DS75176 is equivalent to the SN75176

$1.99 USD

17211

FT232RL USB Driver

Begone, hard-to-program USB devices! At the hands of my FT232RL chip, you will behave like a serial comm port!

$4.50 USD

17280

ST232ACN

he ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard.

$1.95 USD

50846

Concave Button

Got an application needing a button you can POUND on? This 35mm concave momentary push button is quite like the ones you find on arcade games.

$1.95 USD

33047

Switchable Voltage Divider

Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the voltage divider.

$15.00 USD

50839

Momentary Push Button Switch - 12mm Square

You want a massive, hefty push-button? Check out this 12mm square unit!

$0.50 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!