Parts


Show: Items

Sort By:


37 Products Found


18825

Adafruit FeatherWing Proto - Prototyping Add-on For All Feather Boards

A Feather board without ambition is a Feather board without FeatherWings!

$4.95 USD

18845

DC Motor + Stepper FeatherWing Add-on For All Feather Boards

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors).

$19.95 USD

29140

Seeed Grove - Serial Camera Kit - 22.40 - 67.20

Grove - Serial Camera Kit includes one control board and two interchangeable lenses, one standard lens and one wide-angle lens.

$29.90 USD

52070

Teensy USB Board, Version 3.5 without Pins

PJRC did it again! Arduino compatible, 32bit, 120MHz ARM Cortex M4, and 5V tolerant to boot!

$24.25 USD

52072

Teensy USB Board, Version 3.6 without Pins

PJRC did it again! Arduino compatible, 32bit, and a 180MHz ARM Cortex M4!

$29.25 USD

60117

Raspberry Pi S.A.F.E. for V3

The Raspberry Pi S.A.F.E. is a useful, simple acrylic enclosure kit designed for your Pi V3.

$6.25 USD

40406

Buck Boost Converter

1.25 ~ 35V Buck/Boost Regulator with 3A current capability

$4.50 USD

60116

Raspberry Pi S.A.F.E. (for B+ and V2)

The Raspberry Pi SAFE acrylic kit is an inexpensive and attractive way to protect your B+ / V2

$6.25 USD

29146

GrovePi Starter Kit for Raspberry Pi

Carrying a GrovePi+ board together with 12 carefully selected Grove sensors with 10 pieces cables, this starter kit gets you up and running with the Raspberry Pi quickly. Supports Linux / Windows IoT

$89.90 USD

17090

16MHz Through-Hole Crystal for Arduino

16.000MHz. That's pretty darn precise. And exactly the value needed to run an ATmega8/168/328 microcontroller at Arduino-compatible frequency!

$0.95 USD

17440

Barrel Power Jack socket, 2.1mm Connection

2.1mm barrel power jack socket. For connecting barrels, I mean "power leads"!

$1.00 USD

50510

FTDI Basic Breakout (3.3V)

This is the SparkFun basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and compatible (like the Freeduino SB) boards. 3.3V version.

$13.95 USD

50512

FTDI Basic Breakout (5V)

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards.

$14.95 USD

60113-tb

Arduino Due Faceplate

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of development boards + shields.

$3.00 USD

39240

TTLyFTDI USB-to-TTL Cable Adapter

Need to add a virtual COM port to your PC? The TTLyFTDI adapter plugs onto your USB mini-B cable, and breaks out all the standard lines for Arduino-type TTL communication!

$14.95 USD

60100

Solarbotics Arduino Freeduino Enclosure (SAFE)

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your chopsticks. And by chopsticks, we mean Arduino or Freeduino. Go figure.

$9.95 USD

60119

"Big Red" Enclosure

This big, bright red plastic enclosure, that we affectionately call "Big Red", will give your projects the protection (and attention) they deserve. It will also keep your electronics safe and sound indoors or outdoors as it includes a convenient weatherproof seal!

$8.95 USD

37041

2-1/4" Round Mini Speaker 8 Ohm

2-1/4" round, 8 ohm, 0.25 watt general purpose replacement speaker. Paper cone, Alnico magnet. Unit comes with 6" wire lead attached.

$1.95 USD

60102

Netduino Faceplate for the S.A.F.E.

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of microcontrollers.

$3.00 USD

60104

Netduino Plus Faceplate for the S.A.F.E.

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of microcontrollers.

$3.00 USD

60108

EZ-B Faceplate for the S.A.F.E.

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of microcontrollers.

$3.00 USD

60106

Wayne & Layne Video Game Shield Faceplate for the S.A.F.E.

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of microcontrollers.

$3.00 USD

60110

PICAXE 28X2 Shield Base Faceplate for the S.A.F.E.

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of microcontrollers.

$3.00 USD

60114

Clear Acrylic Lid for the S.A.F.E.

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now you can buy a clear lid separately.

$2.95 USD

60112

Gameduino Faceplate for the S.A.F.E.

The Solarbotics Arduino Freeduino Enclosure (SAFE) is a laser-cut acrylic case for your projects - now we created a line of faceplates to custom-fit a variety of microcontrollers.

$3.00 USD

Currency


Login

Email:

Password:

Remember Me

Forgot Your Password?

Don't Have an Account?
Sign Up!